worm reduction gearbox

Our worm gear reducers offer an option of a good or hollow result shaft and show an adjustable mounting placement. Both SW-1 and the SW-5, however, can endure shock loading much better than other reduction gearbox styles, making them perfect for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light-weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow worm reduction gearbox output shaft
Adjustable mounting position
Worm Gear Quickness Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Models for 56C and 145TC Motors
Our regular 700 Series – the heart of EP Gear’s swiftness reducer product line – has been serving industry reliably for over 40 years. Its verified modular style has set the industry standard for performance and may be the most imitated item in today’s worm gear rate reducer marketplace. But why settle for a knock-off when you can have the initial – from EP Gear.
Specifications
11 basic single reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting versatility allows for installation in practically any position.
Housings are straddle-milled, top and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for maximum durability, and also greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings are available in our eCatalog.
GEARBOX REDUCERS
Right angle gearboxes (worm and planetary) are tough and built for 90° turns. Inline reducers (parallel shaft and planetary) are an ideal match for motors with high input speeds, or when gearmotor effectiveness is important. Contact our technical sales staff for help identifying which gearbox alternative is most beneficial for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm gear reducers were created with a hollow bore and invite for a corner turn with optional dual output. The reducers can be found in 12 ratios which range from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our right angle gearboxes were created with five mounting choices providing versatility when incorporating the reducer into product.
RIGHT ANGLE BEVEL GEARBOX
bevel-right-angle-gearbox
The proper angle bevel gearbox combines the features of our right angle worm and planetary inline reducers. With a solid and efficient correct angle configuration, our right angle planetary gearboxes offer a robust solution. The proper angle bevel gearbox comes in 18 ratios ranging from 5:1 to 1000:1, and it is back-drivable at all ratios.
INLINE REDUCERS
I-SERIES PLANETARY GEARBOX
i-series-planetary-gearbox
Our I-Series small planetary gearbox configurations supply the smallest footprint and quietest procedure of our velocity reducers. These gearboxes are made to deal with varying loads with little backlash. With framework sizes 52cm, 62cm, and 81cm, 12 ratios ranging from 5:1 to 308:1, we’ve a solution to fit your needs. Our 52 frame size is also available with plastic gears for noise-delicate applications.
INLINE PLANETARY GEARBOX
inline-planetary-gearbox
Our inline planetary gearbox configurations supply the highest efficiency and best output torque of most our velocity reducers. These gearboxes are made to manage varying loads with small backlash. Planetary equipment reducers operate more quietly than parallel shaft reducers. With 18 ratio options ranging from 5:1 to 1000:1, we’ve a solution to suit your needs.
PARALLEL SHAFT GEARBOX
parallel-shaft-gearbox
Parallel shaft gearboxes will be the top choice for constant duty applications. Their gear cluster design provides a highly effective method for dissipating warmth. Parallel shaft gearboxes have the shortest amount of our inline equipment reducer options therefore they work well in environments with limited space. Our parallel shaft gear reducers provide an affordable drop-in alternative solution for most small parallel shaft gearmotors.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right angle gearboxes, acceleration reducers, worm gear reducers and worm drive gearboxes. Gear decrease boxes feature a gear arrangement in which a gear in the form of a screw, also called a worm, meshes with a worm gear. These gears are usually made from bronze and the worms are steel or stainless steel.

While worm gears are similar to a spur equipment, the worm gearboxes are significantly smaller than other gear reduction boxes. A main benefit of worm equipment reducers is usually that they produce an output that is 90° from the insight and can be used to transmit higher torque or decrease rotational speed. Most often, a worm gearbox has right hand threads; to improve the direction of the result, a left-hand thread worm gearbox is necessary.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Gear Reducer 10:1 Ratio

Cast Iron Worm Gear Reducers are available in center distances 1.33 – 3.25 inches in ratio’s from 5:1 to 60:1. The devices possess a one piece #Fc20 all cast iron housing, NEMA electric motor quill style input flanges or shaft inputs, come pre-loaded with synthetic oil and also have a 12 months warranty.

Features:
Tapered roller bearings on the input and output shafts
Embedded double-lip oil seals
Anti-rust primer applied inside and outside of the gearbox
Air dry special black paint
Product Specifications

OUTPUT SPEED (RPM) 175
OVERHUNG LOAD LBS. 300
EFFICIENCY 86
BRAND EP
MANUFACTURERS PART Amount HdRS133-10/1-R
CROSS REFERENCE Boston 713; Grove B213
DESCRIPTION Cast Iron Correct Ange Worm Gear Reducer
BACKLASH (FT.) (ANGULAR MINUTES) 27
OUTPUT SHAFT THRUST LOAD (LBS.) 300
MAX INPUT HP 0.77
MAX TORQUE (IN-LBS.) 247
WCD CENTER INCHES 1.33
GEAR RATIO 10:1

Ever-Power EP series triple-reduction worm gear swiftness reducers can be found in ratios from 5000:1 to 175,000:1 and center distances from 7” to 20” (larger sizes on request). Output torque ranges from 33,000 in lbs. for the 7” CD EP-70 to 582,900 in pounds for the EP-200. Mechanical HP input requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers can be found in four configurations: horizontal, vertical, shafted, and shaft installed.

These reducers are perfect for water/waste-water tools drive applications such as thickeners and clarifiers, which require a vertical down shaft. Other offered configurations also make Ever-Power triple reduction reducers perfect for use on mixers, elevators, solar panels, astronomical telescopes, indexing tables, hoists, conveyors, or additional process or components handling systems where large torques/gradual speeds are needed.

These reducers are also available with a helical primary reduction stage and so are termed the HDVM series

Enclosed Gears / Gearboxes
Enclosed gears, also called gearboxes or rate reducers, are open gears within a housing. The housing facilitates bearings and shafts, retains in lubricants, and protects the elements from surrounding conditions. Gearboxes can be found in an array of load capacities and speed ratios.

The objective of a gearbox is to increase or reduce speed. As a result, torque output would be the inverse of the function. If the enclosed drive is usually a acceleration reducer, the torque output will increase; if the drive improves speed, the torque output will reduce. Gear drive selection factors include: shaft orientation, quickness ratio, design type, character of load, gear rating, environment, mounting position, working temperature range, and lubrication.

Basic Types of Gearboxes

Worm Gear Speed Reducers
A single reduction speed reducer can achieve up to 100:1 decrease ratio in a small package. Known as right position drives, these consist of a cylindrical worm with screw threads and a worm. With an individual start worm, the worm equipment advances only one tooth for every 360-degree turn of the worm. So, whatever the worm’s size, the gear ratio is the ‘size of the worm gear to 1′. Higher reduction ratios could be created through the use of double and triple decrease ratios.

Helical Gear Speed Reducers
Provide high-efficiency speed decrease through 1, 2, 3, or 4 pieces of gears. Power is definitely transmitted from a high-acceleration pinion to a slower-speed equipment. Helical gears usually operate with their shafts parallel to one another. Both most common types will be the concentric (insight and result shafts are in series) and parallel shaft (input and result shafts are offset). Single-stage helical gear reducers are typically used for equipment ratios up to about 8:1. Where cheaper speeds and higher ratios are required, dual, triple, and quadruple equipment reduction stages can be used.

Cycloidal Disc Speed Reducers
Different from conventional gearing because they operate with out a high quickness pinion or gear teeth, and the parts operate in compression instead of shear. This is due to the design of the cycloidal discs that roll within a band gear housing, similar to a planetary style. The main components will be the eccentric cam, the internally flanged output shaft, the discs, and the ring gear casing.

Three Mounting Options
(L-R) Bottom Mounted, Shaft-Mounted, Gearmotor
(L-R) Base-Mounted, Shaft-Mounted, Gearmotor

Base-mounted reducers, that have feet for bolting, are the most common.

Shaft-mounted reducers possess a hollow output shaft that slips over the driven shaft.

A gearmotor combines a specific gearset with a motor. A motorized reducer resembles a gearmotor except that it is driven by a separate NEMA C-face motor.

Seals and Breathers
Seals are used between the gear housing and insight and output shafts to retain oil and block dirt. The most commonly utilized type, the radial lip seal, contains a metal casing that fits into the casing bore and an elastomeric sealing lip that presses on the shaft. Labyrinth seals are use for high-rate applications, and contain a housing with a series of rings that limit leakage. A breather is certainly a connect with a hole that’s mounted in the gear housing allowing airflow and relieve inner pressure.

Lubrication
Enclosed gears are generally lubricated with oil. The most common types of essential oil are rust and oxidation inhibiting, severe pressure, compounded, and synthetic. Other types consist of grease and solid film. Grease can be utilized for worm, planetary, cycloidal, and hypoidal reducers. Common distribution strategies are a splash system and a circulating system
Worm Reduction Gearbox App:

Worm drives are a compact means of substantially decreasing speed and increasing torque. Little electric motors are generally high-speed and low-torque; the addition of a worm drive increases the selection of applications that it may be suitable for, particularly when the worm drive’s compactness is considered.

Worm drives are used in presses, in rolling mills, in conveying engineering, in mining sector devices, and on rudders. In addition, milling heads and rotary tables are positioned using high-precision duplex worm drives with adjustable backlash.

Tags:

As one of leading rigid coupling manufacturers, suppliers and exporters of mechanical products, We offer rigid coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of rigid coupling

Recent Posts