The high-end economy lines GSN & GFE combine high performance with economic efficiency: both lines are also equipped with helical ground gears, ensuring the very least noise level and smooth running. The full needle bearing provides been especially made to reach high torques that beat the competition for models of the same size. All planetary carriers are produced as a cage made from solid material. This increases calm operating characteristics while at the same time improving positioning accuracy and reducing backlash. An additional shaft sealing ring ensures maximum dirt and splash water safety relative to protection course IP65 in all lines.
One way to reduce backlash is to use precision gears. The focus on manufacturing in precision gears can be tighter tolerances, so all around the gear will be a tighter, more precise match. And the tighter match means less play in the gear teeth, which may be the trigger of backlash to begin with. Of training course, precision gears are more expensive, if the application demands high accuracy, after that precision gearing could be the way to go.
From a gear design perspective, an easy way to lessen backlash is to ensure the teeth mesh tightly together. That is typically performed by shortening the center distance between gears. For pre-loading, this is often done utilizing a spring mechanism to carry the gears firmly set up. This also eliminates the enjoy between the gear teeth and thus eliminates backlash.
Of course, the type of gears used can also have a large impact on the amount of backlash. So for example, some equipment types such as stress wave gears, or harmonic equipment drives, have zero backlash.
The GSD, GSB & GSBL high-end gearbox lines are constructed in a space-optimized, two-stage design. Because of the lower torque ideals, the input stage is usually dimensionally smaller than the result stage. Its short style makes the GSD line the perfect high-end gearbox for space restricted applications. The low regular backlash of the GSD line makes it an ideal fit for highly dynamic applications where highest positioning and acceleration accuracy is necessary. The flange result creates highest torsional rigidity. For the lodging of particularly high axial loads, taper roller bearings are elective in sizes with 90 mm diameter or more. The GSB line stands for high performance in combination with low backlash and high precision. Its robust, one-piece housing allows for a higher gearbox rigidity and the absorption of high radial and axial loads. The angular gearboxes of the GSBL series provide same advantages as the GSB line; the right angle shape makes the GSBL range an ideal match for all dynamic applications where space is limited.