Timing of sprocket replacement

In the event the engagement in between chain and sprockets becomes defective or any element that brings about excessive decline inside the strength in the chain takes place, exchange the whole chain. When any in the following conditions happen inside the chain you employ, change the entire chain to preserve safety.
When a chain is worn close to the “Elongation restrict of chain” .
?Whenever a flaw or crack occurs within a plate.
?Whenever a flaw or crack or defective rotation of the roller is observed.
?When a chain link is stiff.
?When a pin has been rotated.
?Whenever a pin is bent or otherwise deformed or whenever a plate is significantly warped.
?When rust buildup prevents smooth bending in the chain.
?When diluted sulfuric acid or any other corrosive material is deposited.
In case you cannot judge whether a flaw is “harmful”, please seek advice from us.
Replacement of sprockets and how to order
The daily life of sprockets is usually a number of occasions the existence of a chain, but when the teeth are worn simply because of inadequate lubrication or damaged due to the fact of a shock load, etc., the sprockets must be replaced.
?When placing an order, please specify the next when the chain No. is identified.
one. Chain No. and variety of strands
two. Type of sprockets
3. Shaft hole diameter (d) (This can be not needed in case you drill this hole; in this instance, drill a hole not exceeding the maximum shaft hole diameter.)
4. Number of teeth
five. Hub diameter (DH) and length (L) (from the case of non-standard sprockets)
6. Whether the tooth heads are hardened
Specify the next goods, if your chain No. is unknown
1. Tooth thickness (T)
2. Root diameter (DB) (Caliper diameter (DC) within the case of odd-number teeth)


As one of leading rigid coupling manufacturers, suppliers and exporters of mechanical products, We offer rigid coupling and many other products.

Please contact us for details.


Manufacturer supplier exporter of rigid coupling

Recent Posts