The way to connect O-ring Chains Remarks to connect general O-ring Chains

one.A connecting link of an O-ring Chain for common application is pre-coated with grease with the pins. Ahead of connection, verify the grease over the surfaces of pins, and when the level of grease is compact, apply grease with bare hands. (If gloves are applied, the grease are going to be absorbed from the gloves.)
Example: Once the connecting website link (I) of an O-ring chain for common application is
shipped, O-rings are fitted with the roots of your pins. If the O-rings come loose as a consequence of vibration for the duration of transport, refit the O-rings in on the roots with the pins.
In this instance, you’ll want to return the grease collected at the roots in the pins for the central surfaces of the pins, a lot more at portion A than at portions B shown while in the over illustration. (Portions A is worn on account of sliding with all the bushings.)
2.The chain could be most effortlessly linked about the teeth of the sprocket. Engage the links at each ends on the chain together with the sprocket teeth and match connecting pins. In case the sprocket is often moved, the chain can also be connected to the loosened side.
three. Connecting procedure
one.Confirm that O-rings are connected to the roots on the pins.
2.In case the level of grease utilized over the connecting pins is modest, coat the pins with grease at the central portions.
three.Insert the connecting pins to the bushings of the inner links at both ends.
four.Verify that the grease is applied towards the complete encounter of the O-ring, and fit the O-ring onto the connecting pins.
five.Insert the connecting pins to the connecting plate and whilst pressing the connecting plate, install the spring clip. Confirm irrespective of whether the head (the finish with no split) with the spring clip is turned during the feeding route with the chain. (See the next illustration.)
6.Be sure you verify the spring clip is securely fitted from the clip grooves with the connecting pins.
This completes jointing on the connecting link. Note that grease to the surfaces of connecting pins and O-rings may be removed all through set up work. In this instance, re-grease working with the grease over the surface from the base chain or even the grease from the polyethylene bag during which the connecting hyperlink was contained.


As one of leading rigid coupling manufacturers, suppliers and exporters of mechanical products, We offer rigid coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of rigid coupling

Recent Posts