Material Managing Power UNIT 2
This energy unit functions power up gravity down circuit. Activate the begin solenoid to start out the motor to lift the machine. The lowing movement is activated from the solenoid valve using the lowering velocity managed through the strain compensated movement handle valve. Items of this series is often widely utilized in the sector of logistic products which include fork lift, mini lift table, and so forth.
1. The duty of this energy unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean every one of the hydraulic elements concerned before mounting the electrical power unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst,which ought to also be clean and absolutely free of impurities, N46 hydraulic oil is proposed .
four. Oil modifying is needed right after the preliminary a hundred operation hrs,afterwards the moment every single 3000 hrs.
5. The electrical power unit need to be mounted horizontally.
Materials Handling Power UNIT one
This energy unit is developed for the fork lift market, consisting of remarkably efficient gear pump, DC motor, manual raise and reduce valve, tank, ect. The up and down motion are managed by the lever in the guide release valve, that is equipped with an electrical switch to activate the motor. The lowing pace is controlled by the pressure compensated flow manage valve.
one. The duty of this power unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean the many hydraulic components concerned prior to installation of the power unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst, which really should also be clean and free of charge of impurities, N46 hydraulic oil is recommended .
4. Oil modifying is required after the preliminary one hundred operation hours, afterwards as soon as every single 3000 hrs.
5. The energy unit proven is made to be mounted horizontally.