Leaf Chain

Leaf chains include pins and plates only and therefore are higher in strength than roller chains. These are ideal for duties like hoisting and pulling. Leaf chains conform to ANSI and have two types: AL and BL.
AL variety
For that use that static load is applied with minor concern of wearing.
BL style
To the use that wear resistance is needed considering that influence load is utilized.
Choice of leaf chains
The chain size is selected in accordance to the following formula:
Acting tension?¨¢Service factor¡§QMaximum allowable tension Notes:
1. Acting tension contains the dead excess weight of your chain, the weight of the attachments and inertia.
two. In the event the chain pace exceeds thirty m/min, use a roller chain.
Minimum sheave diameter: S.D = Chain pitch?¨¢5
Minimum width involving flanges: L = Total length of pin?¨¢1.05
?If connecting pins are supplied: L¡§R2L1?¨¢1.05
F.D = S.D + Highest link plate height (H) Note:?If dimension H exceeds 25.4,
F.D = S.D + 25.four can be adopted since the minimal flange outer diameter.
Periodical inspection and instructions for substitute
Make sure to carry out periodical inspection and lubrication to verify safety and prolong chain existence. Difficulties and guidelines for option are outlined in the following.
Dilemma:Circumferential wear of plate
Alternative:Exchange the chain if wear loss turns into 5 % of H.
Problem:Oblique put on of plate and pin head
Remedy:Align the unit.
Trouble:Abnormal protrusion or rotation of pin head
Alternative:Substitute the chain Lubricate and reduce overload.
Problem:Wear elongation
Solution:Substitute the chain when its length gets one.03L. Note: Dress in elongation of the
chain lowers its tensile strength.
Put on elongation of 3% lowers the tensile power by 18 percent.
The put on lifestyle of chain is often enhanced by lubrication. Exchange the chain.
Challenge:Cracked plate (1)Crack: In the hole of a link plate towards the finish of the hyperlink plate from the direction perpendicular to stress route.
Alternative:Change the chain using a chain of increased maximum allowable tension, or decrease the load or dynamic (shock) load.
Issue:Cracked plate (two)Crack: In an oblique path towards tension route.
Alternative:Substitute the chain, and protect from corrosive conditions.
Issue:Broken plate(by substantial tension)
Answer:Replace the chain, and eradicate the bring about of overload.
Trouble:Enlarged plate hole
Solution:Replace the chain, and get rid of the bring about of overload.
Challenge:Corrosion of pit
Answer:Change the chain, and secure from corrosive circumstances.


As one of leading rigid coupling manufacturers, suppliers and exporters of mechanical products, We offer rigid coupling and many other products.

Please contact us for details.


Manufacturer supplier exporter of rigid coupling

Recent Posts