Cyclo Drive Reducer

Cycloidal pinwheel reducer is usually a up-dated of fresh type transmissing machine designed with K-H-V less pearly whites engagement and the cycloidal pin steering wheel clenching mechanism, which are trusted in drive and lowering of textile and dying, foodstuff, mining and metallurgy, Essential oil and chemical Industry, task machinery etc, conveyors and cranes. various fields.

1. Gear is made from high power low carbon alloy metal by carburizing and quenching. The hardness of tooth area can reach HRC58-62. CNC grinding technology is adopted for all good contact efficiency, with high precision and gears
2. high transmission performance: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable operation and low noise;
4, compact structure, light weight, long service existence and high bearing ability;
5. easy to disassemble, assemble and check.

Operation specifications and precautions
1.High modularization design: various equip with various engine or other power suggestions conveniently.Same machine type may equip with numerous power motor. It really is easy to understand the combination and
junction between every equipment type.
2.Transmission ratio: okay division, wide scope. The combined machine type may form very large transmitting ratio, i.e. end result very low rotary speed.
3.Form of unit installation: the positioning to be installed is not limited.
4.High strength, compact: the box body is made of large strength cast iron. Gear and equipment shaft adapts the gas carbonization, quenching and excellent grinding process, therefore the bearing ability of unitvolume is high.
5.Long life: Beneath the condition of correct type chosen (including choosing appropriate operation parameters)normal procedure and maintenance, the life of main parts of speed reducer (except wearing parts) shouldn’t be significantly less than 20000 hours. The wearing parts include lubricating bearing, oil seal and essential oil.
6.Low noise: because main elements of speed reducer are processed, assembled and tested critically,therefore the noise of speed reducer is normally low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High speed ratio and efficiency
Single stage transmission may reach to at least one 1:87 of speed-down ratio and the efficiency is definitely more than 90%. If work with multi-speed get the speed-down ratio is certainly bigger.
2. Compact
Being adapted epicyclic tranny basic principle, the input and end result shaft are at same axis middle, it is compact.
3. Smooth and stable run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the device part is stable, the vibration and noise is limited anyway content.
1. Large deceleration ratio
A higher deceleration ratio of 1/30-1/320 can be acquired.The structure is easy, but it can realize high reduction ratio unit.
2. Small gear clearance
The Drive, which meshes with ordinary gears and has minimal backlash, is vital to the controller business.
3. High precision
Multiple teeth are involved concurrently, and there are several gears engaged with 180 degree symmetry. Subsequently, the effect of tooth pitch mistake and cumulative tooth pitch error on the rotation accuracy is relatively average, making the positioning precision and rotation precision reach an extremely high level.
4. Less parts, easy installation
The three basic parts achieve a higher deceleration ratio, and they are all on a single axis, so the kit is easy to install and easy to shape.
5. Small in proportions and light in weight
Compared with the prior gear device, the quantity is 1/3, the fat is 1/2, but can buy the same torque capability and reduction ratio, obtaining small lightweight.
6 High torque capacity
Flexible wheel material USES particular steel with large fatigue strength.Different from ordinary transmission unit, the quantity of teeth meshing accounts for on the subject of 30% of the total quantity of teeth. Additionally, it is in contact with the surface, to ensure that the pressure borne by each equipment is reduced and high torque ability can be obtained.
7 High efficiency
The sliding of gear meshing parts is very small, which reduces the power loss due to friction. Therefore, high reduction ratio can be achieved while maintaining high proficiency, and miniaturization of driving motor could be realized.
8. Low noise
The apparatus meshing cycle swiftness is low, the transmission motion force balance, which means procedure is quiet, and the vibration is quite small.
◆Huge speed ratio and high efficiency single-stage transmission can perform a deceleration ratio of 1 1:87, and the efficiency is a lot more than 90%. If multi-stage transmission can be used, the deceleration ratio will become larger.
◆Because planetary transmission basic principle is adopted, the source shaft and result shaft are on a single axis line, in order that the machine model can get the smallest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is much larger, and the mechanism of balancing machine parts makes the vibration and voice limited by a minimum.
◆Reliable use and extended service life because the primary parts are constructed with high carbon chromium steel, great strength is obtained by quenching (HRC58-62), and rolling friction can be used in a few transmission contacts, so the service life is prolonged.
Cycloid reducer is a cycloid needle teeth meshing planetary transmission principle drive models, is an excellent transmission has many advantages, versatile, and can be both negative and positive operation.

•Big ratio, and high efficiency Smooth operation,

• low noise The usage of reliable,

• long life can reach 50000 hours

• Main parts high-carbon the Ming-steel after quenching treatment (HRC58-62),

• operation and connection with rolling friction, basically very little wear, durable.

• Compact structure,

• small size Because the use of a planetary transmission, the suggestions shaft and the productivity shaft on a single axis, which makes the model to obtain the smallest possible size.

• Reasonable design, easy maintenance, and break down easily install,

• minimal number of parts and basic lubrication, cycloid reducer trusted by the user.
(1)Size above PL/PF120(including)high torque products adopt integral double wall planet pinion increase the output strength, precision and carrier.

(2).Hoop clamp coupling have five connection techniques well suited for different application environments.

(3).Size above PL/PF120(including)precision and high power integral inner gear housing, processed in a single station,which eradicate the cumulative mistake and assembling mistake of split type.Get rid of casting process;adopt warm of forging process, that may reduce the blank material defects.

(4).The meshing gear adopt shaving procedure after carburizing and quenching,which simpler to make gear surface smooth and high precision,decrease the temperature rising due to gear surface area gluing and friction.
This series worm-gear reducer was built after RV worm microreducer, that have a complete norm, wide speed for selection, and many mounting positions. Its functionality and mounting dime nsions conform the same types of foreign.
The combo of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square beautiful shape, shape, radiate heat efficiently, compact structure and low noise.
Great sealing and adaptability.Its blend with T equipment reducer and MB/MBN variator may meet all types of speed requirement.


As one of leading rigid coupling manufacturers, suppliers and exporters of mechanical products, We offer rigid coupling and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of rigid coupling

Recent Posts